Marine Application

Dustless Blasting increases productivity, decreases media consumption, and solves air quality issues. By adding water we’re adding mass and energy, removing coatings faster and with less abrasive! The water traps the blast media and pulverized coating, and grounding it, preventing it from going into the air. This solves air quality issues, and allows other workers to work on the same vessel at the same time! Dustless Blasting is exactly what it sounds like; once the media hits the surface being blasted it loses all energy, and falls to the ground. Media only goes where you put it! This makes proper, environmentally compliant disposal easier than ever.

Related Videos

Fiberglass Boat Stripping with the Dustless Blaster

Dustless Blasting a 54 Foot Viking Yacht

Dustless Blasting International Work Boat Show

Dustless Blasting Coating and Corrosion Removal

Dustless Blasting Heavy Marine Growth

Dustless Blasting has proven ideal for the removal of paint or epoxy from aluminum vessels. Since aluminum is relatively soft compared to steel, traditional dry sand blasting can leave the metal too rough. The resulting overly aggressive profile must then be filled with extra layers of paint or epoxy. The water used in the Dustless process adds energy and increases productivity, while also producing a more ideal profile.

Because the water reduces friction and cools the metal, the risk of warping is removed, even for thinner areas of aluminum such as the wheelhouse.
Dustless Blasting solves environmental issues by trapping the abrasive and pulverized coating in water and grounding it. Rather than going into the air and floating who knows where, these blasting byproducts stay in one place where you can dispose of them properly.

• Reduce Containment

• Environmentally Friendly

• All Weather

• Creates New Anchor Profile

• Blast With Welders, Electricians, And Painters Present!

We’ve never found a coating the Dustless Blasting couldn’t handle. From simple paints to fusion bonded epoxies to thermoplastic to 60 mil thick nonskid! No matter the substrate or the coating, you can get it done faster with the Dustless Blaster!

Comments are closed.